|
||
|
1. Fiberglass Shingle Roof |
11. 2" x 6" Exterior Walls |
| Each shingle attached with six fasteners, backed by 20-year limited warranty. | With 26-gauge uplift straps attached to the floor and rafters. |
2. Asphalt Laminated Reinforced Shingle Underlayment |
12. 2" x 4" Interior Walls |
| In addition to a layer of 15-lb roofing felt. | Gypsum board covered with decorative wall vinyls |
3. Oriented Strand Board Roof Sheathing |
13. Double Marriage Walls |
| Engineered to resist racking and shape distortion under high wind. | Walls from each side of the home join together at the center line forming an double wall to provide superior structural stability. |
4. Truss Roof Rafter System |
14. Decorator Gypsum Interior Walls |
| With double rafters within 3' of front & rear. (Approved for hurricane zones I, II & III) Solid one-piece structural center beams. |
Or optional painted textured walls. |
5. Blown Cellulose Ceiling Insulation |
15. Oriented Strand Board Floor Decking |
| Fire retardant and formaldehyde-free. | Langboard OSB comes with a 10-year limited warranty against delamination. |
6. Insulated Flex-Duct System |
16. Fiberglass Blanket Floor Insulation |
| Fiber reinforced mastic sealed airtight insulated flex-duct system with sealed interior risers insulated with fiberglass. |
A one-piece blanket of insulation covers each section to provide the highest amount of energy efficiency. |
7. Ventilated Roof Cavity |
17. Transverse Floor Construction |
| In addition to a whole house ventilation system. | Tongue-and-groove floor decking. |
8. Vinyl Lap Siding |
18. Reinforced Polyvinyl Bottom Board |
| 50-year limited warranty: won't dent, rot, chip or corrode. | Helps eliminate moisture infiltration and air seepage. |
9. 3/8" Structural Sheathing Under Lap Siding |
19. Solid Steel I-Beam |
| Adds strength and extra insulation to walls. | With a steel front header frame member and full outriggers on 14' wide sections. |
10. Fiberglass Exterior Wall Insulation |
20. Tie-Down Connectors |
| For maximum energy efficiency. | Vertical, horizontal and frame tie-down connectors |
|
|
Specifications subject to change without notice. |
|